The wedding has long since been and gone, but I’m finally getting around to posting these photos of Paula in her dress.
A big thanks to Dave Watts for taking such beautiful pictures! I feel super lucky to have these lovely shots of something I’ve made. You can find him here if you’d like to see more of his wedding photography, or contact him about your own photographic needs.
And another thanks to all my lovely friends who’ve enquired about this recently, it’s been really amazing to have everyone taking an interest in this project! I hope these photos round off the story nicely…
In 5 weeks time the actual wedding will be over, so this is the big push to make up the final dress! In an ideal world it’ll be ready for the final fitting by next weekend, leaving me a couple of weeks to hem it, add a hook-up train solution, and do any last minute alterations. And that’s not a completely unrealistic goal: as we stand right now the top mesh layer is sewn! And almost all the pieces are cut ready for the second layer. The petticoat is well into development too. So if I can plough on during the evenings of the coming week maybe I can avoid a last minute panic?!
I wanted to get the petticoat nailed first, but that didn’t go terribly well. I’d tried to do research on how to make an underskirt but I kept coming up with nothing. We’d bought 10m of very stiff mesh at the beginning of this project, so I persevered with that, making tiers with an enormous amount of volume in them, but it didn’t look right. It was more like a tutu for a small child than a couture undergarment.
At which point Lucy, in trying to help out and find some more information online, realised that there was an alluring array available on eBay for no more than twenty quid… So I downed tools and bought one.
And it’s not too bad! Much more volume than I was managing to create. But very, very light ivory, which I would’ve preferred to be more like a cream. Also, and fairly vitally, it’s quite short. Even with my fitted facing on the top, the length is still 13cm shorter than the dress itself will be.
I am going to have to build it up a bit bigger, so I will add a layer of my own tiered mesh; to create a kind of hybrid store bought / made to measure petticoat. So this extra layer can be a little longer, and maybe that will be enough! Maybe under the full dress it will all work. And if it doesn’t then I’ll need to make a panel of my own to go between the boned top panel and the top tier of the bought petticoat.
Petticoat will therefore stay flexible until I’ve got more of the dress done, and we’ll cross these bridges when we get to them. But I’m really glad I ditched the overlapping panel closure solution (on the left below) and changed to more panels and an open ended zipper. The new one is working out very nicely, so at least I feel that however we solve the mesh dilemma it will have a good, well-fitting anchor at the waist.
And on to the actual dress!
Cutting out the skirt panels from the narrow mesh threw up an immediate mishap: I’d miscalculated on the width of the biggest, centre back panel.
I’d been super careful, but there were a few things I’d overlooked (like the centre back edge not being along the grain line all the way to the top, and the fabric being shy of the 90cm). To fix this I had to take away almost 5cm of volume from this panel, which won’t matter in the slightest because the back is not short on volume. Not a disaster, just a momentary pain in the arse.
The zip has been source of great concern for me. It’s a focal point in it’s own way, there’s nowhere to hide with it on a dress with this little adornment, and it could be the difference between the dress looking professional and shoddy. I’m therefore massively relieved to have gotten it in, to the outer layer at least.
Because the two layers are both visible and not just a simple outer and lining, I wasn’t sure what the right solution was. In the end I decided to make both layers up separately anyway, which means the zip construction can be super normal and much more likely to look good, but I do want the seam allowance of the waist seam on the mesh layer to be on the inside of the garment… and whether or not you can visualise what I mean by that! You can trust me that it’s kind of two contradictory things.
Even though I bought a concealed style of zipper I’ve sewn it in in the conventional way. There is an overlap on one side which covers the zip and I hand stitched that to the machine stitching line for the most subtle indention possible, rather than an obvious machined topstitch.
My plan is to make up the top and skirt parts of the bottom layer and then add them to the outer in a way that achieves the waist look I want. Then I will hand stitch the bottom layer to the zipper similarly to a lining, and hopefully that will go without a hitch!
The rest of the panels went to together easily. I’ve put tiny french seams on the bodice at the side and princess seams. The skirt seams are stitched twice and pressed to one side. So far I’m happy with this but I might still need to trim the seam allowance down if it looks too chunky against the silk under layer.
One more week then to make up the under layer, add sleeves to the mesh layer, and work on the petticoat. Seems manageable. And as much as I’m enjoying this I’m glad to see the light at the end of the tunnel!
This is going to be a fairly quick catch up, mostly because I don’t think I took many decent pictures!
In my last blog post (here) Paula tried on the first toile, we pinned it to fit and we made a lot of design decisions. I used those fabric pieces to draft a new version of the pattern in paper, and that’s what I’ve used to cut and make the second toile.
Because the mesh fabric we’ve chosen is so unusual I decided to make the top part of this mock-up in the real thing, rather than calico. Partly because it would be impossible to get the perfect fit otherwise, and partly because I’ve never worked with something like this before so needed the practice! But as it’d just be costly and unnecessary for the skirt I’ve carried on in a medium/heavy weight calico there.
Which led to the first problem – I had the calico in hand before the mesh, so I went ahead and made the skirt first feeling all smug and efficient… Until I realised that meant I couldn’t put the bloody zip in properly. I should have sewn the waist seam for the left and right back panels first, and the centre back seam up to the bottom of the zip opening, then put the zip in, then carried on with all the other seams. Lesson learnt.
The zip threw up a multitude of issues actually. I tried two different methods on the left and right, one with the zip tape between the layers of mesh and the other treating the two layers as one, and in that confusion I stretched one side out pretty badly and ended up with the back neck line on the wonk.
Plus I bought a concealed zip and then realised I didn’t have a concealed zipper foot, which would allow me to stitch right beside the zip teeth. Without that the concealed zip is not even remotely concealed.
And then there’s the petticoat, which I hastily threw together the night before the fitting because I wasn’t really sure what I wanted! But actually that was fine, we talked about how it should be and we used the bit I had made to cobble together a look we liked under the skirt. So this will be the next part I work on; I need to make a wide facing with boning, I’ll meet up with Paula again and check it fits like a glove, then I’ll attach the lining and the amount of mesh we’ve decided on and that will be the first section of the final dress to be finalised.
The actual fitting went well! She seems like a happy camper, so I am too. She’d planned to wear a shaping body con thing underneath, Spanx-style, but actually when we tried that on it just seemed uncomfortable and unnecessary. Also less flattering, weirdly enough. Sometimes I think those garments are counter-productive, instead of smoothing out your silhouette they just squeeze you into a generic amoeba shape with no distinction between bust and waist, bum and thigh. Back in her normal bra the bodice fitted so much better, and we can even take away some fabric from the midriff to properly define her figure – infinitely better than the Spanx scuba sausage.
I’d made the sleeve a wince too tight, so we cut up to see how much to let back out. But it actually looked so nice with a looser, straighter sleeve that we’ve decided to run with that. It’s a bit risky I guess, but at least it’s only sleeves; if we have to whip them off and make slim ones again then it won’t be the end of the world.
So, as previously mentioned my next step is the underskirt contraption. But before I launch into that I’ll take this incarnation in to the seamstresses at work and see what they have to say on the subject. I have a lot of questions and I think there’s loads more minor disasters here that I’m not even aware of. I don’t want any last minute surprises!
Failing to prepare is preparing to fail, said… no one cool, ever.
I have taken the two commercial patterns I bought and had a good, close look at them. Instead of cutting out the tissue paper pieces I’ve traced them off onto dot and cross paper so I can keep the originals intact for another time. Plus, that tissue is really irritating to work with! It’s virtually impossible to make alterations on because it’s so flimsy, so a bit more time spent here will pay dividends.
The plan for the skirt was to keep the volume exactly as the Vogue pattern, but switch the gathered side panels to pleats. I was thinking we should have two deep pleats facing away from centre at front and back, but when I folded these into the paper they just look too contrived and didn’t give the sort of fluffy, flowy look I know Paula likes.
Therefore I moved on to random pleats of mixed depths, all facing away from cf. There are probably a thousand more professional ways I could’ve achieved this! But I chose to prop the paper up with weights at the hem and smoosh the waist down accordingly. As long as the final waist seam measurement matched with the bodice I was pretty easy on the rules.
All hunky dory; until I got to the back and realised that the train was going to look a bit weird folding over itself in that way. You’d naturally want pleats to face away from centre back as well as centre front, but then do you just put up with a weird box pleat on each side?!
To get a better picture of the 3D effect here I pinned my paper pattern to a mannequin:
And at this point I just started to wish that I’d draped it from scratch and not buggered about with the paper pattern at all! Although this stand is not the same size as Paula, and is considerably taller, I could’ve made it work.
Never mind though, I’ve started so I’ll finish. But I’ll definitely keep the pleat size and position flexible so I can chop along the waist seam and move them around while she’s wearing the toile.
Before I cut the fabric out I moved the pleats one more time, reversing the direction of the pleat closest to centre back and then randomly switching some of the others. And I was happier with it then, it felt more organic and interesting, far better suited to the bride in question.
Bodice-wise it’s not been a walk in the park either! I used the size closest to Paula’s body measurements, but I know full well that the initial fit is not going to be good! I’m going to have to take a lot out of the length and I also feel that the shaping in the bodice pieces is too basic, probably leading to a clunky, sack-like fit which is not full enough over her boobs and too baggy below.
I used the Butterick pattern for this part, which has a strapless under bodice with two vertical seams over the bust, plus a long sleeved bodice to be made in lace which has two very large darts from bust to waist. When I laid these two sets of pieces together they seemed like two completely different fits though, with a lot of suppression over the bust on the lace layer. It doesn’t call for stretchy lace, but perhaps all lace has a certain amount of give because of its mesh base?
For our dress we want the mesh and the silk layers to be cut as one, so no contrasting sweetheart neckline underneath, just a well-fitting bodice with armholes and a round neck. So what I’ve done is to take the lace layer of the Butterick pattern (because this fits with the sleeve, which we definitely want to use) and start with that. When I fit it on Paula I’ll need to make the body shorter and probably open it up in some areas and pin away in others, but I think I’ll be able to see where we need to put the seams. It’s hard to know at this stage if I’ll need to make the bodice in 6 pieces, with side panels at front and back, or if only 2 would be ok.
Paula’s imagined from the start that it’d be nice to have a more sheer sleeve, with just a double layer mesh and no silk, so we bought a half metre of our chosen mesh and I’ve incorporated that into the toile to test it.
So now I have a full toile of the outer dress ready to fit! It has a double mesh sleeve on one side and calico on the other, so we can see if we prefer a sheer look or more of a unified, all-over effect. I haven’t put any under layer for the skirt, but I don’t have 6m of very stiff mesh to play with so I think I will make a rough petticoat. It would be good to get the skirt falling properly at this stage so that the pleats will be nice and accurate for our second (and hopefully final!) toile.
Next stage: get Paula over for a fitting, pin and chop this guy as needed, then take it apart and trace it out for the next pattern.